Abstract With the growing industrialization, there is a constant increase in the world demand for iron ore, thus implying an increase in the volume of mining, resulting in the extraction of ores with higher levels of silicon, phosphorus and sulfur impurities. Therefore, it is highly relevant to use beneficiation techniques that allow the use of iron ores with high levels of impurities, and it is known that a widely used alternative is to perform a pre-treatment of iron ore particles in order to reach the limit of acceptable phosphorus before application in steel production. Therefore, this study aims to evaluate the pre-treatment process of iron ore particles aiming at reducing the phosphorus content using the bacterial strain burkolderia caribensis in contaminated iron ore samples. Through the rotatable central composite design technique, it was possible to evaluate the best conditions for the use of the bacterial strain to reduce the phosphorus content in the particles. The results indicated that the developed process has relevant applicability. The results contribute to a better understanding of the use of the bacterial strain as a pretreatment process to reduce the phosphorus content of iron ore particles and also to the development of new cleaner technologies.

With the growing industrialization, there is a constant increase in the world demand for steel, causing an increase on extraction of low-grade iron ores, which bear high levels of impurities. A feasible alternative is the use of residues from steel rolling processes (steelmaking mill scale) generated in the steel industry, which are composed of iron oxides consisting mainly of wustite (FeO), hematite (Fe2O3) and magnetite (Fe3O4). In line with the recycling of wastes, the application of heating by microwave energy in ironmaking processes consists in a promising new method developed in recent decades and is considered a cleaner technique. Therefore, this study aims to evaluate the self-reduction of mixtures composed of iron ore and steelmaking mill scale as iron source, together with coke fines as carbon source, heated using microwave energy. Through the rotational central composite design technique, it was possible to evaluate the best conditions for the use of steelmaking scale residue as well as the effect of the applied microwave energy power. The results indicated that the developed process has relevant utility with up to 41.48% of reduction obtained. The outcomes contribute to a better understanding of iron recovery from steelmaking residues in reduction processes using microwave energy for heating, providing significant insight for the development of new clean technologies.

Abstract In recent decades, microwave energy has been successfully experimented for mining and metallurgy processes and is considered a promising new method for ironmaking. In this context, in the present work, self-reducing mixtures composed of fines of iron ore and coke were prepared, intending to evaluate the degree of reduction of iron ore using microwave energy, applying different contents of coke, levels of power, and reaction times. For this, the degree of reduction was assessed as a function of these variables. Additionally, the reduction kinetics was investigated using chemical and diffusional models, and the microstructure of the samples was evaluated using scanning electron microscopy (SEM). The highest degree of reduction obtained after the experiments was greater than 60% and a statistical investigation showed that the reaction time is the factor with the greatest influence on these results, followed by microwave power and coke content. The investigation of the reaction kinetics showed that the process is chemically controlled, depending on the gasification steps governed by the Boudouard reaction. The images obtained by SEM led to the conclusion that the temperature inside the sample reached 1200°C. Pig iron was found both in the form of whiskers and in the form of metallic droplets.